WHAT IS JETPIA?

 

JETPIA is a fuel saving device and an exhaust gas emission reduction device rolled into one. When installed at the tip of a vehicle’s tailpipe, it delivers the following results:

 

 - Reduced fuel consumption
 - Less harmful exhaust gas emissions
 - Better engine performance
 - Better driving performance

 

In the UK, DHL and Comet have reported fuel consumption reductions in the order of 6% - 11% with JETPIA. Also in the UK, the National Health Service (NHS) installed JETPIA on 24 of its vans as part of its wide-ranging initiatives to reduce its carbon emissions by 14% over a two-year period.

 

Test results and actual user experience show fuel consumption reductions between 5% and 20%, with commensurate reductions in exhaust gas emissions.

 

JETPIA uses patented technology developed by South Korean engineers over a seven-year period and was first introduced in South Korea in 2007.

HOW JETPIA WORKS

Jetpia unit View from the clip side View from the chamber side JETPIA unit - main unit, inner ring and clamp ring

All vehicles (except electric vehicles) are powered with an internal combustion engine, whether they’re using petrol, diesel, LPG or biofuel. Inefficient combustion leads to lower fuel efficiency (ie higher fuel consumption) and higher levels of emission of carbon (CO2) and other harmful exhaust gas, such as hydrocarbon (HC), oxides of nitrogen (NOx) and carbon monoxide (CO).

 

JETPIA makes the condition more conducive to efficient combustion by reducing the back pressure that develops in the exhaust system. This approach is well-known and well-recognised. JETPIA’s ace-in-the-sleeve is its innovative design which applies the Venturi principle. This results in a unit which is super easy to install, cost-effective, maintenance-free and non-invasive to the engine, and works totally passively.

JETPIA makes the condition more conducive to efficient combustion by reducing the back pressure that develops in the exhaust system.

FOLLOW JETPIA AUSTRALIA

Subscribe via RSSSubscribe via LinkedIn
CONTACT US
We operate 9AM - 5PM, Monday to Friday (except public holidays)
p:  07 3103 0111 (Metro Brisbane)           1 300 JETPIA (1 300 548 742)
f:  07 3177 7894 e:  info@jetpia.com.au
   
Genuine Jetpia only from Jetpia Australia  Australasian Fleet Management Association

INSTALLING JETPIA

JETPIA is installed at the tip of the vehicle's
tailpipe (see photos - click for full-sized images).
JETPIA is fitted to the tip of the tail pipe Installed JETPIA Installed JETPIA Installed JETPIA

Installing JETPIA is simple and easy, and should take no more than 5-10 minutes. It involves inserting JETPIA into the tip of the tailpipe and, using a hex screw driver, tightening the clamp bolt so it stays in place. In addition to the clamp ring, we recommend using a sealant for maximum performance of your JETPIA unit.

 

This simple installation process is made possible by JETPIA's innovative design which applies the Venturi principle to effectively suck the back pressure out of the exhaust system.

SPOTLIGHT ON JETPIA

Ray Weh

Big rig fuel economy with JETPIA

I’ve been driving fuel tankers for 34 years. Presently I drive a FM 480 HP I shift 8 wheeler and 50-ton quad dog. Clocked over 1,000,000 kilometres so far on this vehicle. I was asked to trial this new … [Read More...]

JETPIA Testimonial - Nicholas

2013 Ford Ranger fuel economy with JETPIA – towing a caravan

We installed a JETPIA unit to our new 2013 Ford Ranger Dual Cab, 3.2 lt 5cyl turbo diesel on our recent trip from Geraldton, Western Australia through to Port Lincoln in South Australia. We are very happy to … [Read More...]

Anton Van Zandt

2008 Toyota Kluger kX fuel economy with JETPIA

With JETPIA fuel efficiency has gone up by 3.7%, from 13.62 L/100 km to 13.12 L/100 km.  This is a savings of 0.5 L/100 km, or 3.75 litres per week. Over a year I will be saving around $302 (195 litres … [Read More...]

Greg Naylor

2010 Hyundai i30 diesel fuel economy with JETPIA

With a JETPIA unit fitted to Greg Naylor's 2010 Hyundai i30 diesel, its fuel consumption was then monitored on a weekly basis over a four-week period.  During this period, fuel consumption dropped by as much as … [Read More...]

Comet-fleet

Comet achieved 6.64% – 10.89% fuel savings through JETPIA

Comet was a part of the Kesa Group, a FTSE 250 company and Europe’s third-largest electrical retailer.  In 2010 Comet had 260 retail stores, 14 home delivery  bases and five distribution centres through out the … [Read More...]

DHL-truck

New cleaner exhaust management system fitted to DHL Supply Chain customer fleets*

DHL Supply Chain is rolling out a new exhaust gas management technology to its 7.5T rigid and panel van fleets in the UK to bring about improvements in fuel consumption and CO2 emissions. The air dynamics … [Read More...]

More Spotlight on JETPIA

TESTIMONIALS

avatarI’ve been driving fuel tankers for 34 years. Presently I drive a FM 480 HP I shift 8 wheeler and 50-ton quad dog. Clocked over 1,000,000 kilometres so far on this vehicle.

With JETPIA (127mm) average fuel consumption has gone from 2.2 kms/ltr to 2.4 kms/ltr, a 9.1% improvement 2.5 kms/ltr, a 13.6% improvement.  With the amount of driving that I do, I’m saving almost 100 140 litres per week – that’s $150/week $205/week at the current diesel fuel price. Now that’s saving in REAL money.  In six (6) five (5) weeks the Jetpia unit is fully paid for.  It's all money in the bank after that.

This is a good stainless steel product with a lot of technology behind it. Will outlast the vehicle’s exhaust system. And when you swap vehicles, you can always take it off one and put it on to the other.

For the owner-driver looking to save money, Jetpia is a must. For working trucks tippers, garbage contractor’s agitators and earthmoving/container trucks – it’s perfect.

Vehicle:  FM 480 HP I shift 8 wheeler and 50-ton quad dog
JETPIA unit:  127mm

Ray Weh
QLD, March 2014

JETPIA AUSTRALIA ON TWITTER